Welcome

For items related to service campaigns, please call customer service for assistance.
Table of Contents
product product Item shown may not be actual product.
Product and price information are subject to change without notice.
Discontinued

RX-10L Lift Rack - Surface- Mount w/ PowerSlide Slipplates

Item Number: HUNRX10LPS - Supplier: HUNTER ENGINEERING COMPANY

Discontinued.  Replaced by RX10 'T' series lifts.

Description

RX Surface-Mount Scissor Rack (10,000 lb. Capacity/Long Deck) 
with Air line kit, (2) 6,000 lb. Capacity Swing Air Jacks and PowerSlide Slipplates

The Hunter RX10 Lift features a 10,000-lb. lifting capacity and a scissor design requires minimum bay space.

There are many RX-10 models available in surface-mount or flush-mount with various optional add-ons. For assistance in picking the right model for your service facility, call your program representative at 888-424-6857.

Features and Benefits

  • Best-in-class lowered height of only 8.75 inches, providing clearance for vehicles with low ride height or low-hanging spoilers.
  • PowerSlide locks and unlocks slipplates with the touch of a button, removing the hassle of pulling and replacing lock-pins.
  • Fully Integrated Alignmentcapability allowscommunication with a compatible aligner to control PowerSlide functions automatically.
  • Extra-wide 24" runways with louvered ramps prevent wheel spin in wet conditions and make positioning the vehicle on the lift rack easier.
  • Open access at the front and rear create an unrestricted workspace underneath the vehicle.
  • (2) Lightweight and movable work steps lock into 12 secure positions.
  • Safety locks at 16 height positions offer a variety of working heights for the technician.
  • Complete operation from the console.
  • Velocity safety fuses with instantaneously shutdown in the event of hydraulic failure.
  • Sensor Feedback System aid in keeping the runway level and safely stops if an obstruction is detected.
  • Chromed pins and Teflon bearings for long life.
  • 6,000-lb. capacity swing air jacks add the capability of lifting vehicles off the runways during alignment procedures and other service operations.
  • An integrated air line kit provides connections at the front and rear for tools and jacks.
  • Optional AlignLights runway lighting kit illuminates the workspace under the vehicleand turns on and off automatically as rack is raised or lowered.

Includes

  • (2)Movable work steps (surface-mount models only)
  • (2) Front wheel stops
  • (2) Two wheel chocks
  • Air line kit
  • (2) Louvered ramps with built-in wheel stops
  • (2) PowerSlide slipplates
  • (2) 6,000-lb. capacity swing air jacks

Options

HUN2021731 AlignLights Lighting Kit
HUN2023361 PowerSlide Low-Friction Turnplates (50 mm)
HUN2015791 Center Lift Jack Adapter for swing air jacks. Includes clip-on storage tray.

Warranty

Call your Tool and Equipment Program representative for specific warranty information.

Product Specifications

  • Lifting Capacity: 10,000 lbs.
  • Maximum Wheelbase - General Service: 192" (4877 mm)
  • Maximum Wheelbase - Two-Wheel Alignment: 179" (4547 mm)
  • Minimum Four-Wheel Alignment: 88" (2235 mm)
  • Lowered Height: 8.75" (222 mm)
  • Alignment Height: All lock positions
  • Maximum Lift Height: 72" (1829 mm)
  • Tread Width - Minimum Inside: 40" (1016 mm)
  • Tread Width - Maximum Outside: 88" (2235 mm)
  • Runway Width: 24" (609 mm)
  • Motor: 208-230 VAC/60 Hz/26 Amps/1 PH
  • Air: 90-150 p.s.i.